how to fill wood holes before staining
Finish your wood with stain and/or topcoat of your choice. you can see my tutorial for refinishing reclaimed lumber for more details. you can read more on repairing holes in wood in “this whole post is on repairing holes.” when you’re done it should be hard to locate the epoxy filled area! can you spot it below?. Acrylic-based wood filler (greg likes this kind) — note: if you want to stain the wood after you fill it, make sure you use stainable wood fillerputty knife; damp paper towel or rag; sandpaper or sanding block (fine grit); wood with a nail hole, screw hole, scratch, gouge, chip, or crack; note: wood filler/wood putty comes in two types: acrylic-based and nitrocellulose-based.. Once you've fixed a nail hole or other gouge mark in a piece of wood with wood filler, you'll want to stain the wood filler so it matches the rest of the wood.to do this, make sure you're working with a flat surface and test out the stain on a spare piece of wood to see how it reacts to the filler..
how to fill wood holes before staining
Filling nail holes in trim. press matching colored putty into nail holes on your project or trim with the tip of your finger after staining and varnishing. then smooth it off and polish the area with a dry rag. for added durability and to help hide the filler, apply a new coat of compatible finish over the filled woodwork.. For deeper holes, fill in layers 1/4" at a time, which may require 2-6 hours to dry. sand filler smooth and flush to the wood. remove all sanding residue before staining, topcoating or painting. clean up:use soap and water to clean hands and tools before filler dries. staining and finishing: before filling, test stain on scrap wood with filler..
No comments:
Post a Comment