how to sand wood veneer
It is possible to refinish some wood veneer furniture. it is the ability to sand the surface that determines whether you can remove the existing finish. some veneers are so thin that, by sanding the surface, you actually wind up sanding through the veneer at the same time. if you are fortunate enough to have a piece with a 1/4-inch veneer, the. Sand the veneered furniture with 120-grit sandpaper just enough to rough up the wood surface. take care not to remove too much material as veneer is not too thick. wipe the wood with a tack cloth and lightly sand again with 220-grit sandpaper to smooth the wood surface. wipe it clean with a tack cloth.. Wood veneer antique refinish stain and varnishing tips restoration of my mid century record cabinet wood veneer antique ! gets restored, antique salvage project using colron refined wood dye and.
how to sand wood veneer
Wood veneers are thin – we’re talking less than 1/8th of an inch and whether you can sand and restain a veneer will depend on how thick the particular wood veneer is. start by hand sanding a small section to see if you can remove the old finish without sanding through the veneer.. Check the veneer carefully to see that it is smooth. most mill sawn veneer and backed veneer will not need sanding. mill sawn veneer is very thin, 1/42 inch (0.60 mm) and will not stand up to heavy sanding..
No comments:
Post a Comment