how to paint wood paneling walls with grooves
Step 4: fill any knots and/or grooves. if you have a knotty wood paneling or you really hate the grooves in between the panels, now is the time you can fill these. personally, i like to fill the knots but not the grooves. filling the grooves is a lot of work and these grooves can crack in time if your wood panels move or shift.. If you plan to keep the trim's color as-is or paint it a shade different than your wood paneling, remove it from the wall. use a prybar and gently pull it loose. if you plan to paint the trim the same color as the wall, lightly sand the adjacent wood trim on baseboards to allow the paint to adhere to it.. To paint wood paneling is relatively inexpensive first, you have to decide if you really want to paint over your wood paneling.. once you prime and paint there is no going back. the only other option after that would be replacing it, sheet-rocking over it and so on.. between prep, prime and paint it, this is a project that can easily be done in a day for your average sized room (10’x20’)..
how to paint wood paneling walls with grooves
To paint paneling, sand lightly, clean and prime with stain-blocking primer (oil or latex). to fill the grooves, get drywall joint compound and apply to the grooves with a 6-inch drywall knife. press down firmly to make it flush with surrounding paneling, then sand it smooth (use a sanding pole or sanding block to make it flat).. To paint wood paneling, start by filling in the grooves with joint compound if you don't want them to be visible. then, once the joint compound is dry, sand away any excess compound with coarse sandpaper, and sand the entire wall with 220-grit sandpaper to get rid of the protective coating..
No comments:
Post a Comment